This blog is the ONS (Open Notebook Science) record for the work that I personally perform in the lab. It is posted informally and without peer review. Please feel free to comment and contact me at bridget.eklund@ndsu.edu if there is something you're interested in. You can learn more about the lab on our wiki page (http://openwetware.org/wiki/Fisher). Thanks for visiting.

Tuesday, October 28, 2014

LD50s of Listeria monocytogenes in Blaptica dubia roaches

Last Friday (10/24/14) I started an experiment for the high-throughput study of Listeria monocytogenes virulence using Blaptica dubia roaches.  I had previously determined the LD50 values of several mutants of Listeria from Dr. Teresa Bergholz lab in Galleria mellonella (wax worms). I using the roaches for add information about the isolates and to further develop the roach model.

The following protocol was used on Friday.

  1. 2 days before: Request cultures from Becky and streak E.coli DH5alpha on an LB plate
  2. 1 day before: Create overnight (20 hour) cultures in BHI broth and DH5alpha in LB broth and incubate at 37deg C, shaking >225rmp
  3. Day of Injections: Serial dilute 10-fold to 10-7.
    • Inject a set of 8 roaches for each dilution 10-1 to 10-5.Wipe roach with isopropyl alcohol before injection
    • Using sharpened pipette tips, pierce the 2nd to last segment of the abdomen on the dorsal side.
    • Inject 20μl of bacterial solution.
    • Place 4 roaches in a sterile plastic petri dish for storage.
  4. Create a control group by injecting 8 roaches with PBS in the same way.
  5. Make a titer by dividing a plate into 4 quadrants, and spotting five 20μl drops of each 10-fold dilution on BHI plates (LB for E. coli).
  6. Store roaches at 37°C for 10 days—record any deaths.
  7.  Calculate LD50 of each strain using titer and survival of roaches.
Sharpening of extra-long gel loading tips.
Recording of roach survival













//BEE

Tuesday, October 21, 2014

Francisella LD50 in Blaptica dubia roaches

from 10/17/14

Unfortunately due to complications with the media, spot titer plates did not produce individual colonies to determine CFU/dose for the three Francisella strains being tested. Because of this, the LD50 cannot be determined.
Francisella plates

However, the spot plates for Burkholderia K56-2 strain and E.coli DH5alpha were able to be read, and the PBS control showed no signs of bacterial contamination.
E.coli, K56-2, and PBS plates


Roaches in 37 deg C incubator
The roaches are being tracked for survival and will be observed for 6 more days.











//BEE 

LD50 of Francisella in Wax Worms

In addition to finding the LD50 values Francisella mutants in the Dubia roaches, I have also been repeating the work done by Ben to find the LD50s in the Greater Wax moth. I used the same protocol that was used for finding the LD50s of Listeria for Dr. Bergholz (Listeria LD50 protocol using wax worms).

A few modifications were made to accommodate for the fastidious nature of Francisella, which will not grow well in broth cultures. Mueller-Hinton plates with 2% Isovitalex were used to make 48 hour plates of each Ft culture. A loop of bacteria was suspended in 1ml of sterile PBS to form a bacterial suspension, which was then diluted with PBS.

//BEE

Friday, October 17, 2014

Francisella LD50 in Blaptica dubia roaches

Today I started an experiment for the high-throughput study of Francisella tularensis virulence using Blaptica dubia roaches. The purpose of this study is to ultimately develop a novel insect model that can be more applicable to long term studies.

The following protocol was used today.

  1. Request blinded strains from dawn on Modified Mueller Hinton plates with appropriate times.
  2. Suspend a colony of each bacterial strain in 1mL PBS.
  3. Serial dilute 10-fold to 10-6.
    • Inject a set of 10 roaches for each dilution 100 to 10-5.Wipe roach with isopropyl alcohol before injection
    • Using sharpened pipette tips, pierce the 2nd to last segment of the abdomen on the dorsal side.
    • Inject 20μl of bacterial solution.
  4. Create a control group by injecting 10 roaches with PBS in the same way.
  5. Make a titer by dividing a plate into 4 quadrants, and spotting five 20μl drops of each 10-fold dilution on Mueller-Hinton plates with 2% isovitalex.
  6. Store roaches at 37°C for 10 days—record any deaths.
  7.  Calculate LD50 of each strain using titer and survival of roaches.
//BEE 

Lab Work Update

For the past month I have been working with Dr. Teresa Bergholz's lab. They have supplied me with Listeria monocytogenes and several mutants strains, and I have tested their virulence in Galleria mellonella (wax worms) to determine the lethal dose 50% (LD50). The following protocol was used for the 8 isolates being tested. A total of three replicates were done to find the final LD50s.

Listeria monocytogenes LD50 Protocol
  1. Obtain inoculated plates from Becky
  2. Give to Dawn for blinding of overnight broth cultures in BHI media 
    • Incubate at 37°C shaking for 20 hours 
  3. Remove 1 mL of bacterial suspention into a 2.0 mL epp tube 
  4. Wash cells to remove BHI media and resuspend with PBS 
    • Centrifuge at 13,000g for 1 minute in 2.0mL epp tube, wash twice. 
  5. Make serial 1:10 dilutions of each overnight culture to 10-7 using 2.0 mL epp tubes and PBS as diluent 
  6. Create a spot plate titer on BHI plates to determine CFU/mL of each dilution 
    • Using 5x10μL spots for -4 to -7 dilutions 
  7. With a Insulin syringe, inject 30μL into each worm 
    • Set of 10 wax worms for each dilution of each mutant 
  8. Create a control group by injecting 10 worms with PBS 
  9. Place worms in labeled petri plates and securely store them at 37°C for 9 days, observe and record day and number of deaths and pupate 
  10. Calculate LD50 for each mutant of Listeria using F020_LD50Gm excel file
Data was entered into the excel file and stored on my OneDrive account (Listeria Survival Data in wax worms) and found the following data:

Isolate    Rep 1          Rep 2         Rep 3         Average         St Dev
TB7        6.53E+03    3.39E+06    1.12E+04    1.14E+06    1.95E+06
TB10      4.18E+04    1.30E+03    1.13E+04    1.81E+04    2.11E+04
TB18      2.74E+04    1.62E+04    1.16E+04    1.84E+04    8.13E+03
TB19      4.77E+04    2.47E+03    1.10E+04    2.04E+04    2.40E+04
TB25      2.66E+05    5.56E+04    1.24E+05    1.48E+05    1.07E+05
TB26      7.07E+04    2.62E+04    6.18E+04    5.29E+04    2.35E+04
TB27      1.13E+04    1.53E+03    6.83E+03    6.55E+03    4.89E+03
TB133    4.18E+04    7.42E+04    8.25E+04    6.62E+04    2.15E+04
DH5a     3.39E+06    6.60E+04    1.47E+05    9.79E+05    1.61E+06
                                   3.13E+05   

Table can be viewed in the excel file here:Listeria LD50 Values     

//BEE 

Wednesday, July 30, 2014

Update

For the past two weeks I have been testing the cytotoxicity of several ATCC S.maltophilia strains when the antibiotic vancomycin is present. I have been using the dictyostelium plaque assay to compare the PFU50 with and without vancomycin at a concentration of 25micrograms/ml. So far I have not seen a significant difference in PFU50 when vancomycin is present. The antibiotic stock was made fresh each time the plates were made and fresh bacterial cultures were always used.

It was decided that roaches should be acclimated for 3 weeks at 37 deg C before using for experiments, so I will start my next survival trial when I get back using Francisella and a few mutants to determine LD50 in the dubia roaches.

//BEE 

Thursday, July 10, 2014

PFD50 with Dicty and Vancomycin

Today I am using the Dicty predation assay to observe the cytotoxicity of several strains of bacteria when vancomycin in present on the media. I will be using eight Stenotrophomonas maltophilia strains from the ATCC: BAA2423, BAA84, 700, 13270, 17660, 13637, 51, 49; Escherichia coli B/r; Klebsiella aerogenes; Burkholderia cenocepacia K56-2. The purpose of this experiment is to see if there is an increase in the cytotoxicity of the bacteria in the presence of vancomycin. If so, we will see an increase in the PFD50 (plaque forming unit) when vancomycin is present in the media. Klebsiella and E.coli will be used as positive controls. I will be using the following protocol.


Dictyostelium PFD50 Protocol
Materials
  • Cultures of selected bacteria
    • S. malt BAA2423, BAA84, 700, 13270, 17660, 13637, 51, 49 
    • Escherichia coli B/r 
    • Burkholderia cenocepacia K56-2 
    • Klebsiella aerogenes  
  • Dictyostelium discoideum grown on E.coli B/r
  • 2.0mL eppendorf tubes
  • p200 pipette with tips
  • p1000 pipette with tips
  • Sterile loops
  • Sterile spreaders
  • Sterile water
  • p20 multichannel pipette with tips
  • 96-well plate
  • SM/2 +Vanco25 plates
  • SM/2 plates
Protocol

  1. Make overnight cultures of bacteria strains by suspending a colony in 3mLs of LB in a 15 mL centrifuge tube and place tubes in 37°C shaking incubator for ~16-20 hours
  2. From overnight cultures, pipet 100µL of bacteria solution onto one SM/2+Vanco25 plate and one SM/2 plate. Spread the solutions evenly with a sterile spreader to create a bacterial lawn and let dry in the hood for 30 minutes.
  3. Pipette 1mL of sterile water into a 2.0mL eppendorf tube and suspend 4-5 dicty fruiting bodies.
  4. Serial dilute tube 1:10 to 10-7 in 2.0mL eppendorf tubes
    • Add 900µL sterile water to seven 2.0mL tubes and transfer 100µL to the subsequent tube (change pipette tips in between transfers and mix each suspension thoroughly).
  5. In a 96 well plate, fill one row with the 8 dilutions of Dictyostelium with 300µL, and refill the wells when needed.
  6. With a multichannel pipet, allocate 4 rows of 2 µL of the dilutions onto each plate.
  7. Let the plate sit upright for at least 30 minutes to prevent the spots from running tßogether.
  8. Create a titer by pipetting 100µL of the overnight culture of Klebsiella onto 15 SM/2 plates.
  9. Add 10 µL of the 10-1 to 10-6 dilution to a set of 3 plates and spread the liquid out evenly (3 replicates for an accurate titer).
  10. Observe the plates every day for one week for plaque formation.
  11. Before titer plates are overgrown, calculate the PFU for available plates.
//BEE